|
Square Tube Standard
EN 10210:S235JRH, S355J2H, S355NH, S355J0H
EN 10219:S235JRH, S355J2H, S355NH, S355J0H
ASTM A500:Gr.A, Gr.B, Gr.C
Rectangular Tube Standard
EN 10210:S235JRH, S355J2H, S355NH
EN 10219:S235-S550
ASTM A500:Gr.b
ASTM A501:Gr.b
RHS – Rectangular Hollow Sections
RHS has inherently flat surfaces that make it more economical when it comes to joining and fabrication. Also, RHS is functional with clean lines and is used for construction and architectural applications.
RHS is manufactured in a wide range of dimensions and thicknesses, as well as combinations of both. Available thicknesses across the board are 1.6 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 5 mm, 6 mm, 8 mm, 9 mm, 10 mm, 12.5 mm, and 16 mm. Dimensions range from 50 mm x 20 mm to 400 mm to 300 mm.
SHS – Square Hollow Sections
SHS steel tubing has similar uses to RHS and is used for both industrial and construction applications. Square section RHS is available in the same thicknesses as RHS and dimensions range from 20 mm x 20 mm to 400 mm x 400 mm.
|
